Mapei Ultracolor Plus Coloured Grout Moon White 103

Product Information

After mixing the two components as described above, spread the adhesive on the substrate using a suitable notched recommend using a low-speed electric mixer to guarantee perfect blending, and to avoid overheating of the mix which Mapei Fuga Fresca is designed to be the perfect product for giving old and stained grout that new look finish. The Fuga comes in a small, blue handheld, shoe polish style case with a foam applicator end. A shake and a squeeze will fill the foam end with the Fuga paint ready for application.

Mixing Mapecolor Metallic with Kerapoxy Easy Design of other colours may result in numerous metallic effects with We reserve the right to impose a re delivery charge on all failed deliveries where customers are not present on the arranged delivery day. Parcel Deliveries Repairing existing degraded grouts by removing all loose areas and to a minimum uniform depth of 3 mm. The liquid residual may be removed with the same sponge, which must be replaced when it becomes too impregnated Add Mapecolor Metallic after mixing the two components of Kerapoxy Easy Design (A+B). Create a hole in the pasteMapei Kerapoxy Easy Design Epoxy Tile Grout may be mixed with up to 6% by weight of Mapei MapeGlitter, which is a metallised coloured glitter, to create aesthetic effects. Percentage depends on the aesthetic effect and workability desired. Mapei MapeGlitter is available in 23 different colours. Mapei Kerapoxy Easy Design may also be mixed with Mapei Mapecolor Metallic Glitter, which is available in pre-dosed sachets (90 g, equal to 3% by weight of a 3kg drum of Mapei Kerapoxy Easy Design), this glitter is a powder pigment based on very high-quality pearlescent mica, which is used to create a metallic effect. Mapecolor Metallic is designed for use only with 700 Translucent Easy Design, combining with other colours may produce unusual results. Mapecolor Metallic is available in Moonlight (similar to platinum), Sahara (similar to gold), Shining (similar Before grouting, make sure the installation mortar or adhesive has set and that most of the moisture has evaporated. Mapei Kerapoxy Easy Design is not harmed by damp from the substrate, but the joints must not be wet when grouting. The use of a Scotch-Brite abrasive pad instead of the traditional cellulose sponge for cleaning joints is recommended in The efficiency of UltraCare Kerapoxy Cleaner depends on the amount of residual resin and how much time has passed

Applying the grout: Fill the joints with the Mapei Ultracolor Plus mix using a special MAPEI grout float or rubber squeegee, without leaving any gaps or steps. Remove any excess of Mapei Ultracolor Plus from the surface, by moving the float diagonally to the joints while the mix is still fresh. If the cleaning operation is carried out too soon (the mix is still too wet), some of the mix may be removed from the joints. If grouting is carried out in extremely hot, dry or windy weather, we

Follow Us:

Kerapoxy Easy Design is not harmed by damp from the substrate, but the joints must not be wet when grouting. During application, there can be some overlay onto the tiles (or another surface that the grout in between). This can be cleaned off, but we recommend that you do so as you go, so it doesn’t have time to dry. A good cleaning product would be Everbuild wonder wipes, that can be found here, or you can use a damp sponge. As it is water based, you shouldn’t struggle to clean it off as you go.

If cleaning is carried out a few hours after applying the grout, it may be necessary to leave it standing for longer (at least the aesthetic effect desired, within the limits described above (up to 6% for MapeGlitter, 3% for Mapecolor Metallic so that Always carry out preliminary tests before grouting stone or ground porcelain with a porous or rough surface. Kerapoxy Easy Design does not guarantee a perfect bond when used as a grout if the edges of tiles are wet or contaminated with cement, dust, oil, grease, etc. Use a flexible sealant from the MAPEI range (such as Mapesil AC, Mapesil LM, Mapeflex PU 40, Mapeflex PU 45 FT or

Available in 32 colours of the “MAPEI coloured grouts” range to match the AC silicone range, which you can view here. Alternately, these colours also match the Mapei Ultracolor Plus grout range, that can be found here. obtained and pour Mapecolor Metallic in it; cover it and manually mix to properly blend the powder pigment. Then mix Mapei Kerapoxy Easy Design Epoxy Tile Grout is a two-component, epoxy resin-based decorative grout, with glass micro-spheres and other special components. It has an excellent resistance to acids, easy workability and is very easy to clean.

For residues that have cured on the surface over time or if residues persist then use UltraCare Epoxy Off Gel, special highviscosity cleaner to remove epoxy residues. Given that Mapecolor Metallic is extremely fine and volatile, it is recommended to use and mix the product in exterior, in Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e.g. a MAPEI sponge), working in a diagonal direction to the joints. Rinse the sponge frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. This operation may also be carried out with a machine with a sponge belt or rotating disc. When the mix is partially set, after 50-60 minutes, a damp Scotch-Brite® sponge or an abrasive felt disc may be passed over the joints to even out the surface. Mapei Ultracolor Plus is available in 2kg and 5kg bags, in the following colours: Please note, only some colours are available in 2kg bags. where a high protection from the formation and proliferation of micro-organisms (such as fungus and mould) is required;of a 3 kg drum of Kerapoxy Easy Design), powder pigment based on very high-quality pearlescent mica, to create a Certified according to ISO 22196:2011 as a grouting mortar protected against the formation and proliferation of microorganisms. faster application times and makes it easier to clean from surfaces, with less waste and easier to obtain a good finish; an area protected from draughts. Interior use may cause the product dispersion in the environment and its deposit on Mapei Ultracolor Plus Tile Grout is made up of a blend of special hydraulic binders, graded aggregates, special polymers, water repellent admixtures, organic molecules and pigments.